Concrete Installation: What is Concrete Placing and How Do You Do It?

When you want to have a concrete installation done, it is essential to know what is involved. Concrete placing is just one step of the overall installation, and it must be done correctly for the rest of the project to go smoothly. 

This blog post will discuss what concrete placing is and how you can do it correctly on your next project!

What is Concrete Installation?

Concrete installation is a process in which concrete is poured into a prepared area to create a hardened product. The hardness of the concrete depends on the ingredients used, which can vary based on the desired results.

When it comes down to it, concrete is made of water and a mix of sand and gravel. However, there are a lot of other things that can be added to concrete to change its properties. Changes in these ingredients can change how strong the product is, how it looks and how it feels. Concrete can be used to build whole buildings or sidewalks, as well as smaller jobs like building driveways and walkways.

What is Concrete Placing?

Concrete placement is a critical step in the construction process that determines the structure's success and longevity. While placing the concrete, the technical and environmental factors are carefully considered. From the time it comes out of the mixer until it is finished, the concrete is permitted to go through several phases.

The concrete is delivered, poured, vibrated, matured, and cured before being removed from the form. Each of these phases must adhere to construction techniques considered best practices. We'll go over the particular concerns and methods that must be followed to accomplish good concrete placing.

Technique For a Good Concrete Placing

Preparing for Concrete Placement

When looking to place concrete, it is necessary to take a few steps to ensure smooth placement. The first thing to accomplish is to select the dimensions. These dimensions include the dimensions of the area and the amount of concrete that must be poured to meet the necessary specifications.

Next, it is necessary to prepare the form. The form is the container in which the concrete is poured. It is essential to ensure that the correct form is used, as the dimensions must be correct to get the right amount of concrete. It is also necessary to create a form for the concrete to make it easier to pour the concrete.

Formwork Requirements for Concrete Placement

When looking to put concrete down on a surface, it is necessary to have a form in which the concrete will go. Formwork is a temporary setup that is used to hold down the material. It is essential to get the formwork right to ensure that the concrete goes in the correct place.

The formwork must stay secure during the concrete placing process. The stronger and more durable the formwork, the less likely it will be damaged. Formwork is usually supported to ensure that the form is strong enough to stay in place and not budge.

In addition to the supports, it is helpful to create a steel rebar cage to hold the formwork. The rebar cage is constructed of steel bars anchored directly into the ground, ensuring that the formwork stays in place. The rebar cage is also helpful because it can be used as a guide when pouring the concrete.

Concrete Placement in Special Conditions

Certain situations require a particular concrete placement to ensure that the concrete goes in the correct place. For example, when concrete is being placed near trees in the ground, it is necessary to use bark-reinforced concrete to protect the tree roots from being harmed.

When there are animals on the property, it is necessary to use rebar cages to protect the animals from the concrete being poured. It is also helpful to include wire mesh in the rebar cage to keep the animals away. If concrete is placed near an existing sidewalk, it is necessary to place fill material to make a smooth transition from the old sidewalk to the new concrete.

Consider the Concrete Placement Layers

Concrete placement layers must be applied in a particular way to ensure that the right amount of material is placed.

When placing the concrete, the first layer is always the jointing layer. The jointing layer is a rough, textured layer applied near the top of the formwork. It is helpful because it gives the concrete a surface to adhere to.

The next layer is the finish layer. This layer is smooth and is applied to prepare the concrete for decoration.

When you are looking to place concrete, it is essential to be sure of your steps. Preparation for the job is necessary to ensure that the concrete goes in the correct place and that the job is done correctly.

Consider the Segregation During Concrete Placement

During the concrete placement process, it is essential to consider segregation. Segregation is when different concrete ingredients are placed in other parts of the form. For example, if the concrete is being made with several elements, it is necessary to consider the placement of each element.

It is essential to create the concrete in a low-slump form. When the form is low-slump, it is easier to place the ingredients correctly.

When looking to place a concrete slab, it is essential to mix the concrete in a low-slump form. The low-slump form will make it easier to place the concrete in the correct area, which will make the project go faster and more smoothly.

Conclusion

Concrete placement is a critical step in the construction process and must be done correctly for the project to go smoothly. This involves following several techniques to ensure that the concrete goes in the correct place without damaging anything.

If you are looking for a concrete installation, Victoria Concrete & Paving has you covered. We help you with your various needs, including anything from concrete to asphalt and everything in between. Call us now to know more about what we can do for you!

Frequently Asked Questions